Condensation Insulation

Mittet synthetic lamella mats is used for condensation- and thermal insulation of ventilation ducts. The insulation is made of environmentally friendly lamellae made from a polyester roll laminated to a fiber-reinforced aluminum foil coated with PE. The lamellae can easily be removed from the foil so that you get an overlap in the longitudinal direction.

  • Environmentally friendly, without added adhesives
  • Contributes to improved HSE quality for installer, does not irritate eyes and skin
  • Does not emit emissions, are thermal bound
  • No irritants in the form of itching
  • Recyclable material, can be energy recycled
  • Good tear strength, gives pretty results
  • Withstands moist environments, drains water
  • Approved according to Fire class P1 (NT Fire 036)

Condensation Insulation

Management, assembly, operation and maintenance

Condensation of spiral tube and square channel

Mittet lamella mat is a condensation insulation that simplifies everyday life and improves material utilization. The material is a pressure-resistant and heat insulating insulation reinforced with a diffusion-proof PE film. The material can be delivered as a roller in 1.20m width and 10m length (25mm thick) or 5m length (50mm thick). Precut is adapted to standard pipe dimensions, which simplifies assembly and is time-saving. Readymade fishes for bend are available in all current dimensions and sizes of bends. The use of readymade fish parts contributes to a simpler, cleaner, efficient and profitable assembly. No cuts / wastage and clutter in the workplace. The use of readymade fish gives a better result and gives an important HSE gain. Is very time-saving and more comfortable for the installer, no itch or skin rash.

Approval and operation

Approval and operation

Approval according to NT Fire 036. The insulation material is self-extinguishing and does not generate a burning drip according to Fire class P1. Max temperature of the aluminum foil is -40 + 100 degrees.

Maintenance

The surface can be cleaned with a damp cloth. Routine inspection is performed to ensure that the aluminum foil is full and that loose tape or holes in the foil are repaired.

Waste treatment and packaging

Waste treatment and packaging

The product contains no hazardous waste. Recycling of the insulation is possible and the insulation is energy-efficient.

Safety precautions for machining, assembly and storage

No special safety precautions for machining, assembly and storage are required. The lamella mats do not irritate eyes or skin and requires no respiratory protection, eye protection or protective clothing. The material constitutes a significant HSE improvement.

Assembly

Assembly

The lamella mat should be cut according to desired length + about 50mm overlap. Then remove the required number of slats to get an overlap in the longitudinal direction. The joint is then stapled with a stapler. It is particularly important that all transverse and longitudinal joints are taped. Delivered in plastic packaging and packaged in easy-to-handle sizes. Larger dimensions are packed by order. No minimum requirement.